Contact Us
Associated Pile & Fitting, LLC
P.O. Box 1048
262 Rutherford Blvd.
Clifton NJ, 07014
Toll-Free: 800-526-9047
Fax:973-773-8442
|
Category / H Pile Accessories / H Pile Splicer /
HP-30000 Champion Splicer |
 |
The Champion Splicer is a pair of U-shaped units with flared ends that slip on easily and fit tightly into the two sides of the H. A notch is cut into the web of one pile section and the splicer slipped on the pile; it may have to be tapped on with a sledge for it is designed to fit closely. A short fillet weld is made to the flanges near the corners of the splicer. Only the top section of the pile must have the flanges scarfed for an efficient weld. The length of pile to be added is quickly positioned by this arrangement and held firmly. Additional weld at the opposite corners and across the flanges can be made later without delaying the driving rig and crew.
Available in ASTM A-36 steel or higher strength grades.
Product Code: 004
|
|
|