Contact Us
Associated Pile & Fitting, LLC
P.O. Box 1048
262 Rutherford Blvd.
Clifton NJ, 07014
Toll-Free: 800-526-9047
Fax:973-773-8442
|
Category / Pipe Pile Accessories / Drive-On Pipe Pile Splicer /
Drive-On Pipe Pile Splicer |
 |
|
Of special interest for pipe piles is the Drive-On Splicer. Driving into the tapered splice compresses the pipe ends into a friction fit. No welding is required, speeding the job and minimizing the crew and equipment time.
This splicer is especially advantageous where head room is limited and short lengths of pipe must be used. Each addition can be driven right down to the ground line. If uplift capacity is necessary, the splicer can be made weld-fit and pre-attached to the lower length before lifting into the leads. Driving can be done on the splicer. The next length of pipe is set into the splicer and quickly welded downhand.
The Drive-On Splicer has been successfully used in New Orleans to extend prestressed concrete piles. Also referred to as the "Bruns Pile Connector", short pipe ferrules are cast on one end of each pile length; the modified splicer functions as it does on pipe.
Product Code: 005
|
|
|