Associated Pile

Datasheets

HP Splicer

HP30000

  • Champion Splicer

The Champion Splicer is a pair of U-shaped plates with flared ends that slip on easily and fit tightly into the two ends of the H-pile. Minimal prep work to the H-pile is required prior to attaching the Champion Splicer. Appropriate corner welds and partial penetration groove welds along the flanges of the splicer are required for attachment.

Download Datasheet

© 2018 Associated Pile & Fitting. All rights reserved.
Associated Pile & Fitting • P.O. Box 1264, 45 Samworth Road, Clifton, NJ 07012-1264
Close