Associated Pile

Datasheets

Inside Flange

O-14001

  • Inside flange, Open End Cutting Shoe

The APF cutting shoe assists in providing end protection to the pipe during installation. An inside cutting shoe is needed when maximum friction surrounding the pile is desired. The pipe rests on the cutting shoe ledge rather than depending on welds in shear.

Download Datasheet

P-14006

  • Inside Flange, Conical Points

Conical Points are the preferred end closure for pipe piles. The conical shape pushes the earth aside and preserves friction. The snub nose conical is an economical design which provides end protection in most soil conditions.

Download Datasheet

P-13006

  • Inside Flange, Conical Points

Conical Points are the preferred end closure for pipe piles. The conical shape pushes the earth aside and preserves friction. This model is the heavy duty conical which generally is used for breaking through thick strata and difficult driving conditions. • Benefits: 60 degree Conical Points with heavy internal ribs aid in penetration in difficult soils. On boulders or uneven rock, the point helps to distribute the shock load around the periphery of the pipe rather than concentration it on a quadrant – as occurs with plate closure. 

Download Datasheet

VB9

  • Inside Flange, Conical Points

Conical Points are the preferred end closure for pipe piles. The conical shape pushes the earth aside and preserves friction. This model is the heavy duty conical which generally is used for breaking through thick strata and difficult driving conditions.

Download Datasheet

CP99

  • Inside Flange, Conical Point

Conical Points are the preferred end closure for pipe piles. The conical shape pushes the earth aside and preserves friction. This model is the heavy duty conical which generally is used for breaking through thick strata and difficult driving conditions.

Download Datasheet

© 2018 Associated Pile & Fitting. All rights reserved.
Associated Pile & Fitting • P.O. Box 1264, 45 Samworth Road, Clifton, NJ 07012-1264
Close